NIC-SB10: Redefining What a Ceiling Subwoofer Can Be

What Is the NIC-SB10?

The NIC-SB10 is Ecler's latest addition to the NIC Series, designed to extend low-frequency reinforcement in ceiling and wall installations where a dedicated subwoofer enclosure is not practical. It targets professional audio applications such as retail spaces, hospitality venues, offices and other commercial environments that require controlled bass without a visible floor-standing unit.

Key Specifications

Type: In-ceiling / in-wall subwoofer Woofer: 10" Power handling: 100W RMS Line operation: 70V, 100V and 8Ω (selectable) Distortion control: ART (Acoustic Resonator Technology) Ingress protection: IP66 Grille: Magnetic, frameless, with removable logo Installation accessory: Tile bridge included, for suspended ceiling installation Wiring / power selection: Front-accessible

ART Technology: What It Does and Why It Matters

ART (Acoustic Resonator Technology) is the design principle behind every loudspeaker in the NIC Series, including the NIC-SB10. According to Ecler, ART has been validated through laboratory measurements and is intended to reduce low-frequency distortion compared to conventional closed-box ceiling subwoofers.

In practical terms, this means the subwoofer is designed to produce cleaner, more transparent bass while minimizing the unwanted resonance and coloration that closed-box ceiling subwoofers can introduce into the surrounding structure.

Built for Installers

Several design choices in the NIC-SB10 address common pain points during and after installation:

• Front-accessible wiring and power selection, allowing tapping adjustments (70V/100V/8Ω) even after the unit is mounted, without needing to remove it from the ceiling.

• IP66 rating, making the unit suitable for humid or dusty environments where standard in-ceiling speakers are not rated to operate.

• Magnetic frameless grille with removable logo, for a discreet finish that can be adapted to different branding or aesthetic requirements.

• Included tile bridge, for straightforward mounting in suspended ceiling systems.

Key Features at a Glance

• In-ceiling / in-wall subwoofer

• 10" woofer with 100W RMS power handling

• 70V, 100V and 8Ω operation

• ART (Acoustic Resonator Technology) for reduced low-frequency distortion

• Front-accessible wiring and power selection

• IP66 rated for demanding environments

• Magnetic frameless grille with removable logo

• Tile bridge included for suspended ceiling installation

View the full NIC-SB10 product page

Also New in the NIC Series: NIC-6DN

Alongside the NIC-SB10, Ecler is expanding the NIC Series with the NIC-6DN, a Dante-enabled in-ceiling loudspeaker with a 6.5" woofer and a 1" steerable dome tweeter, rated at 25W RMS, with PoE+/PoE++ power and ART technology. Available Q4 2026. Full specifications will be published on its dedicated product page.

Frequently Asked Questions

What is the Ecler NIC-SB10? It is an in-ceiling / in-wall subwoofer from Ecler's NIC Series, built around a 10" woofer with 100W RMS power handling, designed for 70V, 100V and low-impedance (8Ω) installations.

What is ART (Acoustic Resonator Technology)? ART is Ecler's design technology used across the NIC Series to reduce low-frequency distortion versus conventional closed-box ceiling subwoofers, validated through laboratory measurements.

Can the NIC-SB10 be used with both 100V line and low-impedance systems? Yes. The NIC-SB10 supports 70V, 100V and 8Ω operation, with the power tap selectable from the front of the unit even after installation.

Is the NIC-SB10 suitable for humid or outdoor-adjacent environments? It carries an IP66 rating, which makes it suitable for humid or dusty environments; consult the official datasheet to confirm suitability for any specific outdoor application.

What accessories are available for the NIC-SB10? A black magnetic grille (NICRG10BK) is available as an optional accessory.