ecler

WALL PANELS SERIES WITH MAGNETIC FRONT PLATE ASSEMBLY

The new WPm's remote control panels series has been provided with a new magnetic anchorage system that decreases significantly the installation time, reducing the number of tools needed to assemble them.
Also, now there are new models available with different features, increasing even more, the ease and possibilities to adapt to any customer requirements.

The WP series remote wall panels allow to remotely control the volume of any ECLER unit equipped with volume remote control port(s) (VCA, REMOTE CONTROL). Any of the following WP models is able to do so in the MPA series, AMPACK, NZA series, AMI2-70 series, AMIC, AMIC24, MIMO54, MIMO88, etc. In addition, in some cases (like with the MIMO54 and MIMO88 matrixes) it’’s also possible to control other functions, like the sound source selection or the presets recall, to recover a pre-adjusted set of parameters or configurations aimed to be used in different applications. Please, review the technical information to know in which cases the optional WP-PSU wall-plug power supply is necessary.

New WPmMIX-T
WPmMIX-T is a 2 channel micro-mixer which keeps the standard wall-panel format of the WPm series. It allows to mix a stereo unbalanced signal (2 x RCA) with a microphone signal (XLR), getting a balanced mono output that can be sent to a preamplifier, amplifier, mixer, digital or analogue matrix, etc., thus saving inputs in the receiver device.
The MIC input includes a 2 band EQ (BASS, TREBLE) and it can use the talkover function to override the line signal when the microphone exceeds the talkover detection threshold.

• Unbalanced stereo line input (2 x RCA)
• Balanced microphone input with BASS and TREBLE controls and selectable Phantom power
• Independent volume controls for LINE and MIC inputs
• Talkover function available (MIC over LINE)
• External Power Supply Unit required (12 to 17 VDC). Suggested Ecler PSU unit: WP-PSU (a single WP-PSU unit can feed up to 20 WPmMIX-T units, depending on cable runs and sections)

WPmVOL
Remote wall panel control for one output zone of a MIMO54 unit (zone volume). RJ45 standard connector. Compatible with all Ecler 0-10V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.) including the mimo88 GPI ports. Surface-mount installation box included.

WPmVOL-J
Same features as WPm VOL + front panel stereo mini-jack connector.

WPmVOL-SR
Remote wall panel control for one output zone of a MIMO54 unit(source selection and zone volume). RJ45 standard connector. Volume control compatible with all Ecler0-10V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.) including the MIMO88 GPI ports. Surface-mount installation box included.

WPmVOL-SR-J
me features as WPmVOL-SR + front panel stereo mini-jack connector.

WPmVOL-IR
IR to 0-10 V DC interface + IR remote control set. Volume UP, DOWN & MUTE functions converted from IR pulses to VCA voltages. Wall panel blind plate with IR receiver and IR activity LED (green-orange-red). REVO-IR Remote control included. Compatible with all Ecler 0-10V DC REMOTE control ports (MPA-R, AMIC, AMPACK, MIMO54, etc), including the MIMO88 GPI ports. Surface-mount installation box included.

WPmCNX-XLRM
Connection Wall Plate with Male 3 pin XLR connector. Screw-type connector at the back (no solder needed). Surface-mount installation box included.

WPmCNX-XLRF
Connection Wall Plate with Female 3 pin XLR connector. Screw-type connector at the back (no solder needed). Surface-mount installation box included.

WPmCNX-JRCA
Connection Wall Plate with 1 x stereo minijack and 2 x RCA connectors. Surface-mount installation box included.

WPmH-AT3
100/70 V line attenuator with integrated 24 VCD priority relay. 3 W maximum output power. Surface-mount installation box included.

WPmH-AT6
100/70 V line attenuator with integrated 24 VCD priority relay. 6 W maximum output power. Surface-mount installation box included.

WPmH-SL4
100/70 V line selector (one out of 4 music program lines). Surface-mount installation box included.

WPTOUCH

• Digital remote control, compatible with the MIMO88 digital matrix (digital bus)
• 2 touch-sensitive keys
• 1 touch-sensitive jog wheel
• 1 IR receiver
• 2x16 char. LCD transflective display
• Programmable under the MIMO88 control (digital mode)
• Compatible with the MIMO54 for both volume control and source selection (analogue mode)
• Compatible with other products with 0-10 VDC ports (MPA, AMIC, AMPACK, etc.) for volume control (using an external power supply)
• Recessed or top-wall mount with included accessory