ecler

The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.

Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.

SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.

SAM series general KEY features

• Universal 1 RU, 19” installation mixers
• Excellent frequency response
• Balanced MIC and stereo LINE inputs and main outputs
• Reliable proprietary power supply
• Ideal for any application requiring a trouble free mixer

SAM series Technical Data overview


SAM 312

3 input channels, 2 main outputs. 19” 1 RU universal mixer

• 3 MIC (JACK ¼”) / stereo LINE (RCA) input channel mixer
• Input signal pushbutton selector (MIC/LINE) on back panel
• Dedicated "Low Line" input with adapated sensibility for low level line signal sources, like mp3 players (iPod®, etc.) and laptop computers
• Independent internal assignable phantom power for all MIC inputs
• Direct MIX input allows straight forward connection of further mixers
• Triple tone control (accessible only with screwdriver)
• 2 stereo OUTPUTS (XLR3 / RCA)
• 3 LED OUTPUT level meter
• 2 additional stereo REC outputs (REC1, REC2)
• Mono mode pushbutton
• Headphones general MIX monitoring
• Remote MUTE control (EUROBLOCK) allows connection with fire detection systems
• Side rack mount ears with 2 possible positions, for a perfect front panel alignment with other devices in the same rack

SAM 412T

19 inch installation mixer featuring 4 MIC/LINE inputs and 3 band tone control on each channel.

• 4 channels with 2 selectable inputs per channel (balanced MIC, LINE).
• Adjustable MIC input sensitivity on the rear panel.
• Dedicated "Low Line" input with adapated sensibility for low level line signal sources, like mp3 players (iPod®, etc.) and laptop computers
• +18V Phantom power available in all MIC inputs.
• Channel 1 direct MIC input in the front panel.
• Input 1 TALKOVER with internal jumper for release time.
• 3 band tone control per channel, accessible with screwdriver.Mix signal VU Meter.
• Output level control.
• 2 output levels internally adjustable.
• REC output.
• Direct access to mix bus in order to increase the number of inputs, interconnecting with other mixer.
• MUTE remote control affecting all inputs for the connection of fire alarms and other security devices. Internally adjustable to NO/NC (normally open, normally closed).
• Side rack mount ears with 2 possible positions, for a perfect front panel alignment with other devices in the same rack

SAM 512T

5 input channels, 2 main outputs. 19” 1 RU universal mixer

• 5 MIC (JACK ¼”) / stereo LINE (RCA) input channel mixer
• Input signal pushbutton selector (MIC/LINE) on back panel
• Dedicated "Low Line" input with adapated sensibility for low level line signal sources, like mp3 players (iPod®, etc.) and laptop computers
• PFL on all inputs for headphone monitoring
• Independent internal assignable phantom power for all MIC inputs
• Channel 1 features integrated TALKOVER on MIC input. Additional front panel MIC connector (JACK ¼”)
• Direct MIX input allows straight forward connection of further mixers
• Triple tone control (accessible only with screwdriver)
• 2 stereo OUTPUTS (XLR3 / RCA) with independent volume control
• 3 LED OUTPUT level meter
• 2 additional stereo REC outputs (REC1, REC2)
• Mono mode pushbutton
• Full remote MUTE control (EUROBLOCK) allows connection with fire detection systems
• Side rack mount ears with 2 possible positions, for a perfect front panel alignment with other devices in the same rack

SAM 614T

6 input channels routable to 2 main outputs. 19” 1RU universal mixer

• 6 input channels
• MIC (XLR3) inputs on channels 1 and 2
• Dedicated "Low Line" input with adapated sensibility for low level line signal sources, like mp3 players (iPod®, etc.) and laptop computers
• MIC (JACK ¼”) / stereo LINE (RCA) in channels 3 and 4. Input signal pushbutton selector (MIC/LINE) on back panel
• Stereo LINE (RCA) on channels 5 and 6
• Input signal gain level control (accessible only with screwdriver)
• Each channel features signal present (SP) and CLIP indicators
• General phantom power switch located on back panel. Independent internal phantom power assignment to any MIC input
• Triple tone control (accessible only with screwdriver)
• 2 main stereo OUTPUTS (XLR3) with independent volume control
• 3 LED OUTPUT level meter
• Input channels can be routed to any main output (A,B) or both
• 2 additional stereo REC outputs (REC1, REC2)
• Mono mode selector in outputs A and B
• Headphones monitoring of selected output (A or B)
• Integrated, internally configurable talkover. Affects OUT A and REC A
• Remote MUTE function (PHOENIX) allows linking to external fire detection centrals
• TALKOVER function fully configurable to –20dB or –30dB that affects boths outputs A and REC A
• Side rack mount ears with 2 possible positions, for a perfect front panel alignment with other devices in the same rack

General applications

• Gyms
• Licensed venues
• Restaurants
• Leisure venues
• Retail outlets
• Conference boards
• Entertainment music playback
• Education centres
• A/V presentations