CKL SERIES

ico_ploudspeaker
ico_pinstallation

CKL 110 - Long Throw Sound System

Small-dimensioned trapezoidal acoustic enclosure for mid and high frequency reproduction. Assembled with 18mm thick birch plywood from Finland covered with a scratch and shock resistant polyurethane paint finish. Internally reinforced. The mid frequency way employs an enclosed 10’’ speaker with neodymium motor and carbon fibre compound diaphragm attached to a Tractix horn, which is equipped with a phase corrector. The high frequency way uses a 2’’ compression driver with pure titanium diaphragm, neodymium motor and a 60º x 40º constant directivity diffusor. The speakers are protected against shocks, dust and splashes by a metal grille and an acoustically transparent foam.

The on-axis frequency response within a 3dB margin lies between 170Hz and 19kHz. margin. The efficiency, which is sound pressure level (SPL) at 1m and 1W power input, reaches remarkable 112dB.

The maximum RMS power is 350W at 8Ω, while the program power capacity is 700W at 8Ω.

CKL SM115 - Mid Low CKL 110 Sound Reinforcement

Low-dimensioned trapezoidal acoustic enclosure for mid and low frequency playback. Bandpass type acoustical design. Assembled with 18mm thick birch plywood from Finland covered with a scratch and shock resistant polyurethane paint finish. Internally reinforced. It employs a high performance 15’’ speaker attached to a horn in order to increase efficiency. The speaker is protected against shocks, dust and splashes by a metal grille and an acoustically transparent foam.

The maximum RMS power is 600W at 8Ω, while the program power capacity is 1200W at 8Ω.

Applications

The CKL 110 has been designed for playback of vocal signals in fix installations. It can be used alone or together with the CKL SM115 (which has the same dimensions and shape) to extend the system’s frequency response towards mid and low frequencies. Alone or together with the CKL SM115 the system offers high efficiency levels. This makes it suitable for all applications where voice long throw is the major priority.

This type of enclosure is ideal for: stadiums, gyms, theatres, congress halls, houses of worship and every space which requires long sound throwing and highly intelligible speech.

The CKL SM115 has been designed to extend the playback spectrum of the CKL 110 towards the mid and low frequencies. It can not be used as stand-alone. Its dimensions and shape are the same as CKL 110. It is suitable for all applications that require not only an optimal response at speech frequencies, but also playback of musical signals.

 
ckl_1


ckl_4
CKL SERIES
 
ico_ploudspeaker
ico_pinstallation


CKL110 CKL SM115
Ways 2 1
Nominal impedance
Max RMS power 350W 600W
Program power 700W 1200W
Efficiency SPL 1W 1m 112dB 105dB
Frequency response at –3dB 170Hz÷19kHz 70Hz÷280Hz
Horizontal dispersion 80º @ 250Hz / 60º @ 4kHz --
Vertical dispersion 80º @ 250Hz / 40º @ 4kHz --
Dimensions WxHxD (without feet) 550x550x650mm 550x550x650mm
Weight 47Kg 37,2 kg
ico_ploudspeaker
ico_pinstallation

High resolution images
 
ico_ploudspeaker
ico_pinstallation





ico_ploudspeaker
ico_pinstallation

 
 
Aviso legal