AMPACK SERIES

AMPACK SERIES
TECH DATA
IMAGES
BROCHURE
TECH FILES
USER MANUAL
REFERENCES

amplifier

installation

Ampack Series

With the AMPACK2-70 / 4-70 line of compact amplifiers, installers can enjoy the pro-audio market's lightest, most robust and most reliable amplification technology in a silent and compact format, ideal for use in virtually every kind of application and environment. The delivered power is 2 x 70 or 4 x 70 W RMS in low impedance (4 Ω). For 100 V line applications, you will need the DLAPACK2-70 dual converter, which transforms two 70 W channels at 4 Ω into two 70 W channels at 100 V line.

Key features

Class D amplifier with an output of 2 x 70 W RMS (AMPACK2-70) or 4 x 70 W RMS (AMPACK4-70) at 4 Ω
Ultra light format in the AMPACK2-70 (1.6 kg) and the AMPACK4-70 (1.75 kg)
Silent, high-efficiency amplifier (ventilation by convection, no fan)
Built-in power supply (switching type, except in the AMPACK80)
AUTO STANDBY: when no signal is detected, it automatically goes into standby mode, saving energy
Can operate in stereo, parallel and bridge modes
Independent remote VCA volume control (for each input channel).
See wall panel accessories: rotary wall controls and infrared remote control can be connected to the VCA port
EUROBLOCK input, output and VCA remote control connectors
Additional RCA stereo input connector (AMPACK2-70 and AMPACK80)
L+R mono switch (only in AMPACK2-70)
Independent gain adjustment for each input channel, protected against accidental manipulation
Built-in 100 Hz high-pass filter
Can be installed directly on a 35 mm DIN 35 rail or on an individual support bracket

Applications

A/V Corporate and board rooms
Retail shops
Residential applications

Accessories

WP series: remote control panels
REVO10A: remote level control wall panel

AMPACK SERIES

AMPACK 80

Ampack -Input Connectors + Output Connectors

amplificador

instalación

	AMPACK80
POWER 20-20kHz 1% THD
1 Channel @ 4Ω	78 WRMS
1 Channel @ 8Ω	55 WRMS
2 Channels @ 4Ω	62 WRMS
2 Channels @ 8Ω	46 WRMS
Bridged @ 8Ω	124 WRMS
Frequency response (-1dB)	20Hz - 30kHz
High pass filter 3rd order Butterworth	100Hz
THD+Noise @ 1kHz Full Pwr.	<0.03%
Intermodulation distortion 50Hz & 7kHz, 4:1	<0.03%
TIM 100	<0.05%
S+N/N 20Hz -20kHz @ 1W/4Ω	>80dB
Damping factor 1kHz @ 8Ω	>160
Slew Rate	±10V/μs
Channel crosstalk @ 1kHz	>60dB
Input Sensitivity / Impedance	0dBV/>20kΩ
Auto power threshold	>-20dB
Auto power time	2 min. aprox.
Mains Voltage	230V AC
Power consumption (max. Out)	296VA
Power consumption (standby)	<10VA
Dimensions	218x155x87mm
Weight	4.3kg

	AMPACK 2-70	AMPACK 4-70
POWER 20-20kHz 1% THD
1 Channel @ 4Ω	68 WRMS	68 WRMS
1 Channel @ 8Ω	35 WRMS	35 WRMS
2-4 Channels @ 4Ω	64 WRMS	57 WRMS
2-4 Channels @ 8Ω	35 WRMS	34 WRMS
1-2 Bridged @ 8Ω	135 WRMS	130 WRMS
Frequency response (-3dB)	10Hz - 40kHz	10Hz - 40kHz
High pass filter 3rd order Butterworth	100Hz	100Hz
THD+Noise @ 1kHz Full Pwr.	<0.08%	<0.1%
Intermodulation distortion 50Hz & 7kHz, 4:1	<0.1%	<0.3%
TIM 100	<0.06%	<0.15%
S+N/N 20Hz -20kHz @ 1W/4Ω	>80dB	>80dB
Damping factor 1kHz @ 8Ω	>140	>140
Channel crosstalk @ 1kHz	>50dB	>50dB
Input Sensitivity / Impedance	0dBV/>20kΩ	0dBV/>20kΩ
Auto power threshold	>-35dB aprox.	>-35dB aprox.
Auto power time	2 min. aprox.	2 min. aprox.
Mains Voltage	230V AC	230V AC
Power consumption (pink noise, 1/8 power @ 4ohm)	96VA	135VA
Power consumption (pink noise, 1/3 power @ 4ohm)	170VA	250VA
Power dissipation (standby)	<9W	<9W
Dimensions	234x158.5x75mm	234x158.5x75mm
Weight	1.6kg	1.75kg